The V2-6 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the V2-210S, a V2-6 system will produce high-fidelity, broad spectrum sound that belies its modest size. The V2-6 is also an excellent choice for ancillary delay applications. When used to augment a FOH system in such venues as auditoria, theaters and houses of worship, delay loudspeakers can significantly even-out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-6 loudspeakers in such a manner, the
system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-6 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device.


Features

  • DYNA-TECHTM driver protection circuitry
  • Ferrofluid-treated HF driver for improved heat dissipation Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
  • Rotatable square horn
  • Terminal strip and NL4-compatible connectors
  • Available in standard black or white finishes
  • Mounting yoke included with 10° and 20° vertical standoffs Optional V2-6T autoformer model for 70V/100V applications


Specs

  • Operating Range: 90 Hz to 18 kHz (-10 dB)
  • Frequency Response: 110 Hz to 16 kHz (±3 dB)
  • Max Input Ratings: 100W continuous, 250W program, 28.3 volts RMS, 56.6 volts momentary peak
  • Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) free space
  • Maximum Output: 112 dB SPL / 118 dB SPL (peak)
  • Nominal Impedance: 8 ohms
  • Input Connection: NL4-compatible locking connector with terminal strip in parallel
  • Mounting/Rigging Provisions: 9 x M6 threaded rigging fittings, 4 x M6 threaded fittings for V-HSS and third-party suspension products 
  • Weight: 19.7 lbs (8.9 kg)

Related Products

< >