The V2-8T with a built-in 100W autoformer with taps at 100W, 50W, 25W and 12.5W is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the V2-210S, a V2-8T system will produce high-fidelity, broad spectrum sound that belies its modest size. The V2-8T is also an excellent choice for ancillary delay applications. When used to augment a front-of-house system in such venues as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for under balcony fill, over balcony fill, or simply placed towards the rear of the seating areas. By deploying V2-8T loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-8T may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.

 

Features

  • DYNA-TECH™ driver protection circuitry
  • Ferrofluid-treated HF driver for improved heat dissipation
  • Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
  • Constant-directivity rotatable square horn
  • Terminal strip and NL4-compatible connectors
  • Available in standard black or white finishes
  • Mounting yoke included with 10° and 20° vertical standoffs
  • 100W Autoformer for 70V/100V applications

 

Specs

  • Operating Range: 70 Hz to 18 kHz (-10 dB)
  • Frequency Response: 100 Hz to 16 kHz (±3 dB)
  • Max Input Ratings: 150W continuous, 375W program, 34.6 volts RMS, 69.2 volts momentary peak
  • Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) free space
  • Maximum Output: 114 dB SPL / 120 dB SPL (peak)
  • Nominal Impedance: 8 ohms
  • Input Connection: NL4-compatible locking connector with terminal strip in parallel
  • Mounting/Rigging Provisions: 9 x M6 threaded rigging fittings, 4 x M6 threaded fittings for V-HSS and third-party suspension products
  • Weight: 25.3 lbs (11.5 kg)

Related Products

< >