FREE SHIPPING ON U.S. ORDERS OVER $50
{"id":1384925167700,"title":"Seymour Duncan Antiquity Humbucker Pickup Set (PAF, 1950s, Aged Nickel)","handle":"seymour-duncan-antiquity-humbucker-pickup-set-paf-1950s-aged-nickel","description":"The Antiquity neck humbucker delivers an articulate, yet mellow tone that results from a perfectly balanced frequency response that combines a soft, sweet treble attack with a warm, full sounding low-end. The custom aged alnico 2 bar magnet creates an airy openness to the top-end that gives chords clarity and articulation, while the vintage output coils really bring out the rich harmonic content. Single notes have a beautiful singing quality with just the right amount of treble emphasis.We have taken great care to make sure our Antiquities collection are all hand built in our Custom Shop the way Seth Lover did in 1955. The mold we use for our butyrate bobbins was created by the same factory that built theoriginalPAF mold for Gibson. Other key features include our specially manufactured 42AWG plain enamel mag wire, nickel silver cover, 2.5-inch alnico 2 bar magnet, custom machined metal spacer \u0026amp; maple spacer, single conductor push-back braided lead wire, and nickel silver bottom plate with long mounting legs.Staying true to the original Gibson PAF, these humbuckers are not wax potted which takes you right to the edge of harmonic breakup. For that unmistakable vintage mojo, we wind everyAntiquity humbucker on Seymours original Leesona winding machine from the early Gibson factory in Kalamazoo, MI. Bottom plates \u0026amp; bar magnets are all signed by Seymour to guarantee that you are getting an original Seymour Duncan Antiquity.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eAntiquity Humbuckers Bridge \u003c\/li\u003e\n\u003cli\u003ewidth:  1.494 \u003c\/li\u003e\n\u003cli\u003elength:  2.750 \u003c\/li\u003e\n\u003cli\u003emax height with leg:  1.095 \u003c\/li\u003e\n\u003cli\u003emounting ring width:  1.756 \u003c\/li\u003e\n\u003cli\u003emounting ring length:  3.537 \u003c\/li\u003e\n\u003cli\u003emounting ring max height:  .420 \u003c\/li\u003e\n\u003cli\u003eminimal height:  .350 \u003c\/li\u003e\n\u003cli\u003eadjustable pole piece length:  .750 \u003c\/li\u003e\n\u003cli\u003eheight adj. screw height:  1.250 \u003c\/li\u003e\n\u003cli\u003emagnet calibration:  S-adj. side \u003c\/li\u003e\n\u003cli\u003emagnet gauss:  15-20 gauss \u003c\/li\u003e\n\u003cli\u003eDC Ohms:  8.52K \u003c\/li\u003e\n\u003cli\u003einductance: 5.12 henries \u003c\/li\u003e\n\u003cli\u003eQ:  2.38\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e","published_at":"2018-06-19T21:21:42-04:00","created_at":"2018-06-19T21:21:42-04:00","vendor":"Seymour Duncan","type":"Pickups","tags":["Antiquity","Guitar Parts","Humbuckers","Parts","Pickups"],"price":26900,"price_min":26900,"price_max":26900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12367630303316,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"rev-1665471","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Seymour Duncan Antiquity Humbucker Pickup Set (PAF, 1950s, Aged Nickel)","public_title":null,"options":["Default Title"],"price":26900,"weight":54,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8.00315E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1699\/1203\/products\/sd_antiquity-humbucker-bridge-nickel_3589qrgeoiavlkhfklxvjhzxfv.png?v=1553261678","\/\/cdn.shopify.com\/s\/files\/1\/1699\/1203\/products\/sd_antiquity-humbucker-bridge-nickel_9045guqeivhkjlb.png?v=1553261678"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1699\/1203\/products\/sd_antiquity-humbucker-bridge-nickel_3589qrgeoiavlkhfklxvjhzxfv.png?v=1553261678","options":["Title"],"content":"The Antiquity neck humbucker delivers an articulate, yet mellow tone that results from a perfectly balanced frequency response that combines a soft, sweet treble attack with a warm, full sounding low-end. The custom aged alnico 2 bar magnet creates an airy openness to the top-end that gives chords clarity and articulation, while the vintage output coils really bring out the rich harmonic content. Single notes have a beautiful singing quality with just the right amount of treble emphasis.We have taken great care to make sure our Antiquities collection are all hand built in our Custom Shop the way Seth Lover did in 1955. The mold we use for our butyrate bobbins was created by the same factory that built theoriginalPAF mold for Gibson. Other key features include our specially manufactured 42AWG plain enamel mag wire, nickel silver cover, 2.5-inch alnico 2 bar magnet, custom machined metal spacer \u0026amp; maple spacer, single conductor push-back braided lead wire, and nickel silver bottom plate with long mounting legs.Staying true to the original Gibson PAF, these humbuckers are not wax potted which takes you right to the edge of harmonic breakup. For that unmistakable vintage mojo, we wind everyAntiquity humbucker on Seymours original Leesona winding machine from the early Gibson factory in Kalamazoo, MI. Bottom plates \u0026amp; bar magnets are all signed by Seymour to guarantee that you are getting an original Seymour Duncan Antiquity.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eAntiquity Humbuckers Bridge \u003c\/li\u003e\n\u003cli\u003ewidth:  1.494 \u003c\/li\u003e\n\u003cli\u003elength:  2.750 \u003c\/li\u003e\n\u003cli\u003emax height with leg:  1.095 \u003c\/li\u003e\n\u003cli\u003emounting ring width:  1.756 \u003c\/li\u003e\n\u003cli\u003emounting ring length:  3.537 \u003c\/li\u003e\n\u003cli\u003emounting ring max height:  .420 \u003c\/li\u003e\n\u003cli\u003eminimal height:  .350 \u003c\/li\u003e\n\u003cli\u003eadjustable pole piece length:  .750 \u003c\/li\u003e\n\u003cli\u003eheight adj. screw height:  1.250 \u003c\/li\u003e\n\u003cli\u003emagnet calibration:  S-adj. side \u003c\/li\u003e\n\u003cli\u003emagnet gauss:  15-20 gauss \u003c\/li\u003e\n\u003cli\u003eDC Ohms:  8.52K \u003c\/li\u003e\n\u003cli\u003einductance: 5.12 henries \u003c\/li\u003e\n\u003cli\u003eQ:  2.38\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e"}

Seymour Duncan Antiquity Humbucker Pickup Set (PAF, 1950s, Aged Nickel)

Product Description
The Antiquity neck humbucker delivers an articulate, yet mellow tone that results from a perfectly balanced frequency response that combines a soft, sweet treble attack with a warm, full sounding low-end. The custom aged alnico 2 bar magnet creates an airy openness to the top-end that gives chords clarity and articulation, while the vintage output coils really bring out the rich harmonic content. Single notes have a beautiful singing quality with just the right amount of treble emphasis.We have taken great care to make sure our Antiquities collection are all hand built in our Custom Shop the way Seth Lover did in 1955. The mold we use for our butyrate bobbins was created by the same factory that built theoriginalPAF mold for Gibson. Other key features include our specially manufactured 42AWG plain enamel mag wire, nickel silver cover, 2.5-inch alnico 2 bar magnet, custom machined metal spacer & maple spacer, single conductor push-back braided lead wire, and nickel silver bottom plate with long mounting legs.Staying true to the original Gibson PAF, these humbuckers are not wax potted which takes you right to the edge of harmonic breakup. For that unmistakable vintage mojo, we wind everyAntiquity humbucker on Seymours original Leesona winding machine from the early Gibson factory in Kalamazoo, MI. Bottom plates & bar magnets are all signed by Seymour to guarantee that you are getting an original Seymour Duncan Antiquity.

FEATURES

  • Antiquity Humbuckers Bridge 
  • width:  1.494 
  • length:  2.750 
  • max height with leg:  1.095 
  • mounting ring width:  1.756 
  • mounting ring length:  3.537 
  • mounting ring max height:  .420 
  • minimal height:  .350 
  • adjustable pole piece length:  .750 
  • height adj. screw height:  1.250 
  • magnet calibration:  S-adj. side 
  • magnet gauss:  15-20 gauss 
  • DC Ohms:  8.52K 
  • inductance: 5.12 henries 
  • Q:  2.38


$269.00
Maximum quantity available reached.