FREE SHIPPING ON U.S. ORDERS OVER $50
{"id":1384932540500,"title":"Electro-Harmonix Switchblade + Plus Channel Selector Footswitch Foot Switch A\/B","handle":"electro-harmonix-ehx-switchblade-plus-channel-selector-footswitch-foot-switch-a-b","description":"The Switchblade+ offers a convenient solution to a players switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eControls \u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA\/B Footswitch (LED) Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eA+B Footswitch (LED) Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A\/B Footswitch has no effect on the signal path.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cb\u003eI\/O \u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eINPUT Connect the output of your instrument or another effects pedal to this jack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTUNER Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOUT A Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A\/B and A+B controls, this jack will output either the direct input signal or no signal. When the A\/B LED is lit red or the A+B LED is lit up, OUT A is selected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOUT B Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A\/B and A+B controls, this jack will output either the direct input signal or no signal. When the A\/B LED is lit green or the A+B LED is lit up, OUT B is selected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cb\u003ePower\u003c\/b\u003eåÊ\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Bosså¨ \u0026amp; Ibanezå¨) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.\u003c\/li\u003e\n\u003cli\u003eWhen A+B is engaged, the input impedance at the INPUT jack is equal to 50k in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100k in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.Route your signal to output A or output B or both simultaneously\u003c\/li\u003e\n\u003cli\u003eEasily switch between different pedal boards\u003c\/li\u003e\n\u003cli\u003eThe tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unit\u003c\/li\u003e\n\u003cli\u003eThe audio path is completely passive\u003c\/li\u003e\n\u003cli\u003eThe Switchblade Plus can be powered by a 9 volt battery or 9VDC eliminator\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-06-19T21:22:43-04:00","created_at":"2018-06-19T21:22:43-04:00","vendor":"Electro-Harmonix","type":"Channel Switching","tags":["ABY Pedal","Effects","Electro-Harmonix","Foot Controller","Footswitch"],"price":4450,"price_min":4450,"price_max":4450,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12367638528084,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"rev-3442523","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Electro-Harmonix Switchblade + Plus Channel Selector Footswitch Foot Switch A\/B","public_title":null,"options":["Default Title"],"price":4450,"weight":54,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6.83274E+11"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1699\/1203\/products\/eh_switchblade_plus_29483tugjalshvsldkb.png?v=1553246878"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1699\/1203\/products\/eh_switchblade_plus_29483tugjalshvsldkb.png?v=1553246878","options":["Title"],"content":"The Switchblade+ offers a convenient solution to a players switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eControls \u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA\/B Footswitch (LED) Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eA+B Footswitch (LED) Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A\/B Footswitch has no effect on the signal path.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cb\u003eI\/O \u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eINPUT Connect the output of your instrument or another effects pedal to this jack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTUNER Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOUT A Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A\/B and A+B controls, this jack will output either the direct input signal or no signal. When the A\/B LED is lit red or the A+B LED is lit up, OUT A is selected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eOUT B Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A\/B and A+B controls, this jack will output either the direct input signal or no signal. When the A\/B LED is lit green or the A+B LED is lit up, OUT B is selected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cb\u003ePower\u003c\/b\u003eåÊ\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Bosså¨ \u0026amp; Ibanezå¨) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.\u003c\/li\u003e\n\u003cli\u003eWhen A+B is engaged, the input impedance at the INPUT jack is equal to 50k in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100k in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.Route your signal to output A or output B or both simultaneously\u003c\/li\u003e\n\u003cli\u003eEasily switch between different pedal boards\u003c\/li\u003e\n\u003cli\u003eThe tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unit\u003c\/li\u003e\n\u003cli\u003eThe audio path is completely passive\u003c\/li\u003e\n\u003cli\u003eThe Switchblade Plus can be powered by a 9 volt battery or 9VDC eliminator\u003c\/li\u003e\n\u003c\/ul\u003e"}

Electro-Harmonix Switchblade + Plus Channel Selector Footswitch Foot Switch A/B

Product Description
The Switchblade+ offers a convenient solution to a players switching needs. Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the new Switchblade+ is your utilitarian sidekick.

Controls
  • A/B Footswitch (LED) Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).
  • A+B Footswitch (LED) Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path.

I/O
  • INPUT Connect the output of your instrument or another effects pedal to this jack.
  • TUNER Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit.
  • OUT A Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected.
  • OUT B Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected.

PoweråÊ
  • The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Bosså¨ & Ibanezå¨) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.
  • The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.
  • When A+B is engaged, the input impedance at the INPUT jack is equal to 50k in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100k in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.Route your signal to output A or output B or both simultaneously
  • Easily switch between different pedal boards
  • The tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unit
  • The audio path is completely passive
  • The Switchblade Plus can be powered by a 9 volt battery or 9VDC eliminator
$44.50
Maximum quantity available reached.